Fayat Group BOMAG BW 900-50 Service Manual page 131

Asembling the vibrating drum
Fig. 4
Fig. 5
Fig. 6
Fig. 7
008 921 86
4. Install the seal ring 2 (Fig. 4) on both ends of the
exciter shaft.
i
Note
Lubricate the bearing seat areas.
Danger
!
Danger of burning!
Wear protective gloves
5. Heat the inner bearing races (1) up to approx.
80°C and slide them on the exciter shaft from
both ends.
6. Install coupling hub 1 (Fig. 5).
Caution
!
Danger of squashing!
7. Guide the exciter shaft into the opposite cylinder
roller bearing (Fig. 6).
8. Slide the bearing flange over the exciter shaft and
fasten it with screws 1 (Fig. 7).
BOMAG
10.5
137