Handling And Safety Instructions; Safety Information; Important Safety Instructions - SolarEdge StorEdge Installation Manual

HANDLING AND SAFETY INSTRUCTIONS

During installation, testing and inspection, adherence to all the handling and safety instructions is
mandatory. Failure to do so may result in injury or loss of life and damage to the equipment.

Safety Information

WARNING!
Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could
result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions
are fully understood and met.
CAUTION!
Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could
result in damage or destruction of the product. Do not proceed beyond a caution sign until the
indicated conditions are fully understood and met.
NOTE
Denotes additional information about the current subject.
IMPORTANT SAFETY FEATURE
Denotes information about safety issues.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING!
The inverter cover must be opened only after shutting off the inverter ON/OFF switch located at the
bottom of the inverter. This disables the DC voltage inside the inverter. Wait five minutes before
opening the cover. Otherwise, there is a risk of electric shock from energy stored in the capacitors.
WARNING!
Do not remove the StorEdge Interface cover before five minutes have elapsed after disconnecting all
sources of power, and shutting OFF the inverter and the StorEdge Interface.
WARNING!
Before operating the system, ensure that the power cable and wall outlet have been grounded properly.
WARNING!
When handling the battery, adhere to all manufacturer safety instructions.
-StorEdge Interface Installation Guide MAN-01-00380-1.1
HANDLING AND SAFETY INSTRUCTIONS
3