Configuring StorEdge Applications
Configuring StorEdge Applications
This section describes the StorEdge applications and how to configure the system.
Maximize Self-consumption (MSC)
In this mode, the battery is automatically charged and discharged to meet consumption needs.
The battery has two states:
OFF – the battery is in standby
l
ON – the battery is controlled for maximized self-consumption
l
Battery OFF periods can be configured to extend battery lifetime by minimizing the number of shallow
discharges (for example at nighttime or during the winter).
To set up maximize self-consumption:
1. Enter Setup mode, scroll down to the Power Control menu and select it. A menu similar to the
following is displayed:
G r i d
E n e r g y
R R C R
R e a c t i v e
A c t i v e
P h a s e
W a k e u p
P ( f )
A d v a n c e d
L o a d
2. Select Energy Manager. The following screen is displayed:
L i m i t
E n e r g y
A d v a n c e d
Limit Control: For power limitation (including export limitation) configuration. This
option can be used in parallel to energy control. For more information refer to
http://www.solaredge.com/files/pdfs/products/feed-in_limitation_application_
note.pdf.
Energy Control: The method by which to manage the energy.
Advanced: For enabling external production
3. Select Energy Ctrl.. The following is displayed, showing the SolarEdge applications:
M a x
S e l f - c o n s u m e
T i m e
D i s a b l e
Max Self-consume (MSC): Maximize Self-consumption
Time of Use (TOU): Charge/Discharge Profile Programming
Disable: No energy control, that is, the battery is not used
24
C o n t r o l
< E n >
M a n a g e r
C o n f .
P w r
C o n f .
P w r
C o n f .
B a l a n c e
< D i s >
C o n f .
D e f a u l t s
C o n t r o l < D i s >
C t r l
< D i s >
o f
U s e
StorEdge Interface Installation Guide MAN-01-00380-1.1