4. For maximizing self consumption, select Max Self-Consume. The Energy Manager screen changes to
display the following:
L i m i t
E n e r g y
S e t
S t o r a g e
5. Optionally, set the battery OFF periods as follows:
a. Select Set Operation. A list is displayed, allowing 12 monthly profile setup:
J a n
F e b
M a r
A p r
b. Select a month. A list of options is displayed.
S t a r t
E n d
A l w a y s
A l w a y s
c. Select one of the options:
Select Always OFF to avoid battery usage entirely (for example during winter)
l
Set Start Time and End Time to set battery usage in specific hours and avoid usage during
l
specific hours throughout the month (for example at night). This sets the periods during
which the battery will be in the OFF state.
Select Always ON to use battery at all times for charging/ discharging.
l
Profile Programming (for time-of-use arbitrage)
In this mode, the StorEdge system operates according to a configured charge/ discharge
profile. T his a pplication is covered in a separate application note available at
https://www.solaredge.com/sites/default/files/storedge_applications_connection_
and_configuration_guide.pdf.
Starting-up the System
Upon installation and configuration completion, the power optimizers should be paired to the
inverter.Close the inverter cover and perform pairing as described in the installation guide provided with
your inverter.
-StorEdge Interface Installation Guide MAN-01-00380-1.1
C o n t r o l < D i s >
C t r l
< M S C >
O p e r a t i o n
C t r l
< O N >
< O N >
< O N >
< O N >
T i m e
< 0 0 : 0 0 >
T i m e
< 0 0 : 0 0 >
O N
O F F
Chapter 4: System Configuration
25