Storedge Interface Leds - SolarEdge StorEdge Installation Manual

StorEdge Interface LEDs

LED location
12V IN (left of the main
board)
12V OUT (right of the main
board)
Green LED on the power
supply unit (PSU)
-StorEdge Interface Installation Guide MAN-01-00380-1.1
Functionality
ON -12V (or 13V) is supplied to
the main board
OFF - No power to the main
board
Not in use
ON - PSU output is OK
OFF - no power
Figure 23: LED locations
Appendix A: Troubleshooting
Troubleshooting
N/A
Check AC cable is connected to the the
o
power supply (PSU).
Check green LED indication on the PSU
o
Check the cable connection between the
o
PSU and the main board
N/A
Check the AC cable connection
29