Foreword - MIMAKI JFX200-2513EX Safety Precautions

Foreword

Congratulations on your purchase of UV inkjet printer JFX200-2513EX.
JFX200-2513EX is a UV inkjet printer that supports high speed and high image quality, printing with UV ink.
l DISCLAMER OF WARRANTY
THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS.
AND MIMAKI NEITHER ASSUMES NOR AUTHORIZES DEALER TO ASSUME FOR IT ANY OTHER
OBLIGATION OR LIABILITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY IN
CONNECTION WITH ANY PRODUCT WITHOUT MIMAKI'S PRIOR WRITTEN CONSENT.
IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDNETAL OR CONSEQUENTIAL
DAMAGES OR FOR LOSS OF PROFITS OF DEALER OR CUSTOMERS OF ANY PRODUCT.
l Requests
• This Operation Manual explains how to operate and maintain "UV inkjet printer
JFX200-2513EX" (hereafter called "this machine").
• Please read and fully understand this Operation Manual before using this machine. Also, please always
keep this Operation Manual handy.
• Make arrangements to deliver this Operation Manual to the person in charge of the operation of this
machine.
• This Operation Manual has been carefully prepared for your easy understanding. However, if you have
any inquiries, contact your local distributor, our sales office, or service center.
• Descriptions contained in this Operation Manual are subject to change without notice for improvement.
• In the case where this Operation Manual should be illegible due to destruction or breakage, contact our
sales office.
• You can also download the latest manual from our website.
l FCC Statement (USA)
This equipment has been tested and found to comply with the limits for a Class A ITE, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the operation manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his/her own expense.
• In the case where MIMAKI-recommended cable is not used for connection of this machine, limits provided
by FCC rules can be exceeded.
To prevent this, use of MIMAKI-recommended cable is essential for the connection of this machine.
l Interference to televisions and radios
The printer described in this manual generates low radio waves while it is in operation. This printer can
interfere with the reception of radios and televisions if set up or used under improper conditions. This printer
is not guaranteed against any damage to specific-purpose radios and televisions.
If you feel that this printer might be causing reception interference with your radio or television, check by
turning the power switch on and off. If the reception interference disappears when the power is turned off, it
is likely that this printer is the cause of the interference.
If this is the case, try to eliminate it by performing any or a combination of the following procedures.
• Change the direction of the receiving antenna of your radio/television until there is no reception.
• Move the receiver away from the product.
Foreword
1