USC MX2500 Operator's Manual page 9

4. Provide a fire extinguisher for use in case of an accident. Store in a
highly visible place.
5. Do not allow children, spectators or bystanders within hazard area of
machine.
6. Wear appropriate protective gear. This includes but is not limited to:

A hard hat

Protective shoes with slip resistant soles

Protective goggles

Heavy gloves

Hearing protection

Respirator or filter mask
7. Place all controls in neutral or off, stop motor, and wait for all moving
parts to stop. Then disable power source before servicing, adjusting,
repairing, or unplugging.
8. Review safety related items annually with all personnel who will be operating or
maintaining the MX Series Seed Treater.
1. Read and understand the Operator's Manual and all safety signs before using.
2. Disconnect and disable electrical supply completely and wait for all moving parts
to stop before servicing, adjusting, repairing or unplugging.
3. Clear the area of bystanders, especially children, before starting.
4. Be familiar with the machine hazard area. If anyone enters hazard area, shut
down machine immediately. Clear the area before restarting.
5. Keep hands, feet, hair and clothing away from all moving and/or rotating parts.
6. Stay away from overhead obstructions and power lines during operation and
transporting. Electrocution can occur without direct contact.
7. Do not operate machine when any guards are removed.
8. Inspect welds and repair if needed.
MX2500
OPERATING SAFETY:
USC,
LLC
Page 9