H-O-A Screen - USC MX2500 Operator's Manual

MX2500
Main Screen Button Descriptions
1. Seed Flow Rate:
Displays the seed flow rate in pounds per minute.
2. Seed Type Indicator:
Displays the type of seed has been selected in the
"Product Selection" Screen.
3. Totalized Weight Display:
Displays the total pounds of seed as it passes
through the seed wheel.
4. Current Date and Time Display
5. Emergency Stop Indicator:
This blinking display is activated when the system
E-Stop button is activated.
6. Seed Wheel Motor Status Indicator:
Informs the operator if the seed wheel is
"ON" or "OFF
7. Hopper Full:
Informs the operator when the proximity switch located in the
supply hopper above the seed wheel is detecting seed.
8. Hopper Empty:
Informs the operator when the proximity switches located in
the seed wheel are not detecting seed.
9. Inlet Conveyor Motor Status Indicator:
Informs the operator if the inlet
conveyor is "ON" or "OFF."
10. Outlet Conveyor Motor Status Indicator:
Informs the operator if the outlet
conveyor is "ON" or "OFF."
11. Mix Tanks Motor Status Indicator:
Informs the operator if the agitation mo-
tors are "ON" or OFF"
12. "H-O-A" (Hand-Off-Auto):
This button advances the operator to the "H-O-A"
screen.
13. "UTILITIES":
This button advances the operator to the "Utilities" screen.
14. "CUP WEIGHT":
Pressing this button will bring up a numeric keypad (below)
which allows the operator to input the "cup weight" for the Seed Wheel. This
weight is used to calculate the seed flow rate the seed wheel will output.
USC, Page 25
LLC