MB Connect Line mbNET.rokey Series Quick Start Up Manual page 12

Function / status LEDs
LED Colour Status
Fc1
green flashes
(5 Hz)
on
Fc2
orange flashes
green flashes
Fc3
orange off
flashes
green
off
lights up GSM devices: (+ Fc4 green): 71 - 100%
Fc4 orange off
flashes
green
off
on
flashes
SIMPLY.connect * ready and disabled
This function is only available if the device is set to its factory settings.
SIMPLY.connect * ready and activated - activation takes place by pres-
sing the Dial Out button.
(1 Hz) Data received at COM
(1 Hz) Data transmission to COM
GSM devices: no reception
(1 Hz) GSM devices: == 20% - 50%
GSM devices: reception depending on Fc4
GSM devices: no reception
(1 Hz) GSM devices:(+Fc3 Orange) == 51 % – 70 %
GSM devices: reception depending on Fc3
GSM devices: (+Fc3 green) 71 – 100 %
During the activation phase of mbEDGE the LED Fc4 flashes at a frequen-
cy of 3 Hz (fast).
After completion of activation at a frequency of 1.5 Hz (slow).
*SIMPLY.connect is a web application that helps you to set up a device (mbNET)
To activate the function, press the Dial Out button until Fc1 lights up.
If you do not want to use SIMPLY.connect, simply ignore the flashing LED Fc1.
More information is available at: https://simplyconnect.mbconnectline.com/
- 12 -
Description
in the Remote Service Portal mbCONNECT24.