MB Connect Line mbNET.rokey Series Quick Start Up Manual page 14

Interfaces and buttons
Label Status
WAN
LED green
WAN-LED
LED orange
LAN 1 - 4
LED green
LAN-LED 1- 4
(Dual LED)
LED orange
USB
COM
Dial Out
Reset
Key switch
Switch
position
RST
OFF red / black
ONL
red / black
REM
– Router WAN port (customer network, DSL modem ...)
lights = Network connection available
flashing = Network data transfer active
– Local network ports (e.g. machine network)
lights = Network connection available
flashing = Network data transfer active
– Portable USB drive port
COM port is for either connecting to devices with MPI interface or to
– devices with RS232 / RS485, RS422 interface.
This depends on your device type.
Button for activating the SIMPLY.connect function
–
(if the LED Fc1 flashes (5 Hz)).
– Pushing this button restarts the router (so-called cold start).
Key
color
red Loading the factory settings
It is not possible to establish a VPN connection.
Modem devices can not connect to the Internet.
It can be established a VPN connection.
With modem devices an Internet connection can be established.
It can be established a VPN connection.
Including routing to the LAN side of the router.
red
With modem devices an Internet connection can be established.
Including routing to the LAN side of the router.
- 14 -
Description
Description