9.3 Logs
9.3.1 View Logs
The logs of the AP record various events that occur and the operations that users perform after the
AP starts. In case of a system fault, you can refer to the logs during troubleshooting.
To access the page, choose Tools > Logs and click View Logs.
To ensure that the logs are recorded correctly, verify the system time of the AP. You can correct the
system time of the AP by choosing Tools > Time & Date > System Time.
To view the latest logs of the AP, click Refresh. To clear the existing logs of the AP, click Clear.
When the AP reboots, the previous logs are lost.
The AP reboots when the AP is powered on after a power failure, the QVLAN function is
configured, the firmware is upgraded, an AP configuration is backed up or restored, or the factory
settings are restored.
87