Interfaces and buttons
Label
Status
WAN
LED green
WAN-LED
LED flashing
LAN 1 - 4
LED green
LAN-LED 1- 4
(Dual LED)
LED flashing
USB
COM1
COM2
Dial Out
Reset
–
Router WAN port (customer network, DSL modem ...)
Network connection available
lights
Network data transfer active
orange
–
Local network ports (e.g. machine network)
Network connection available
lights
Network data transfer active
orange
–
Portable USB drive port
COM1 port for connecting to devices with RS232 / RS485, RS422
–
interface.
COM2 port is for either connecting to devices with MPI interface or
–
to devices with RS232 / RS485, RS422 interface. This de-pends on
your device type.
This button
a) establishes an Internet or VPN connection or
–
b) activates the SIMPLY.connect function, wenn LED Fc1
is flashing (5 Hz).
–
Pushing this button restarts the router (so-called cold start).
- 14 -
Description