MB Connect Line mbNET MDH859 Quick Start Up Manual page 12

Function / status LEDs
LED Colour Status
Fc1
orange
flashes
green
flashes
flashes
(5 Hz)
on
Fc2
orange flashes
green flashes
Fc3 orange off
flashes
green
off
leuchtet
auf
Fc4 orange off
flashes
green off
on
flashes
(1 Hz) Data received at COM1
(1 Hz) Data transmission to COM1
SIMPLY.connect * ready and disabled
This function is only available if the device is set to its factory settings.
SIMPLY.connect * ready and activated - activation takes place by pres-
sing the Dial Out button.
(1 Hz) Data received at COM2
(1 Hz) Data transmission to COM2
GSM devices: no reception
(1 Hz) GSM devices: == 20% - 50%
GSM devices: reception depending on Fc4
GSM devices: (+ Fc4 green) == 71 - 100%
GSM devices: no reception
(1 Hz) GSM device: (+Fc3 orange) == 51 % – 70 %
GSM device: reception depending on Fc3
GSM device: (+Fc3 green) == 71 – 100 %
During the activation phase of mbEDGE the LED Fc4 flashes (3 Hz fast).
After completion of activation Fc4 flashes at a frequency of 1.5 Hz (slow).
*SIMPLY.connect is a web application that helps you to set up a device (mbNET)
To activate the function, press the Dial Out button until Fc1 lights up.
If you do not want to use SIMPLY.connect, simply ignore the flashing LED Fc1.
More information is available at: https://simplyconnect.mbconnectline.com/
- 12 -
Description
in the Remote Service Portal mbCONNECT24.