Advertisement
Step 2:
Connecting communication lines & assembling arm rests:
1.
Dock the Part 6 Screen support tube and connect the communication line as shown below. Secure with
2x Part 13 Bolt and 2x Part 10 Washer.
2.
Secure the Part 7 Right handles to Main frame using 2x Part 9 and 2x Part 10.
Insert the 2x Part 11 into the Part 7 and Part 6, as pictured below.
Caution: You may need a second hand to hold the handle in place to prevent it from falling.
3.
Secure the Part 8 Left handles to the Part 6 using the Part 11 Bolt and 2x Part 10 Washer and 2x Part
12 nut.
Secure the bottom of the arm to Main frame with 2x Part 9 Bolt and 2x Part 10 Washer.
Communication
line connection
8
Advertisement
