18. Webserver
VoCALL 16 provides an ethernet based application to aid in configuration of installed
system. Webserver can be used to configure the system after completing steps
mentioned up-to and including section 11.4
18.1 Connect to Webserver
Webserver is configured to work with Static IP address on a peer to peer connection
between PC and MX16 panel.
Settings required on PC/Laptop – for Windows 10 PC
1. Go to Network and Internet settings.
2. Go to Ethernet -> Change adapter options.
3. Left click on Ethernet and click on properties.
4. Select Internet Protocol Version 4 (TCP/IPv4). Click on properties.
5. Input below values in the settings. Click ok.
a. IP address: 192.168.1.2
b. Subnet mask: 255.255.255.0
c. Default gateway: 192.168.1.1
InStALLAtIon And opErAtIon mAnuAL 25-13741-E January 2020 www.eaton.com
18. Webserver
97