I - Initial Checks; Unpacking The Clock - Bodet 5 Installation And Operation Manual

I – Initial checks
Thank you for choosing a BODET clock.
This product has been carefully designed, adhering to ISO 9001 quality processes, to ensure your
satisfaction. We recommend that you read this manual and the general safety measures and
operating instructions carefully before handling the clock.
Retain this manual for reference for the lifespan of your clock.
The information supplied is non-binding; Bodet reserves the right to make changes to equipment,
including functional, technical and aesthetic changes or changes to colours, without notice.
Failure to observe these instructions may cause irreversible damage to the clock and
invalidate the warranty.
These instructions relate to NTP/Wi-Fi models. For other synchronisations, please refer to
the corresponding instructions.
These instructions relate to the following clocks:
Style 5: hours and minutes display. Height of digits: 5 cm.
Style 5S (seconds): hours, minutes and seconds display. Height of digits: 5 cm.
Style 7: hours and minutes display. Height of digits: 7 cm.
Style 7D (date): hours, minutes, date, day and week display. Height of digits: 7 cm; height of
letters: 5 cm.
Style 7E (ellipse): hours, minutes and revolving seconds display on ellipse design. Height of
digits: 7 cm; height of letters: 5 cm.
Style 7S (seconds): hours, minutes and seconds display. Hours and minutes height of digits:
7 cm; height of digits for seconds: 7 cm
Style 10: hours and minutes display. Height of digits 10 cm.
Style 10S (seconds): hours, minutes and seconds display.
Height of digits for hours and minutes : 10 cm; height of digits for seconds: 7 cm
Style 10D (date): hours, minutes, date, day and week display. Height of digits: 10 cm; height of
letters: 7 cm.
Style 10SD (seconds - date): hours, minutes, seconds, date, day and week display. Height of
digits hours and minutes: 10 cm; height of digits for seconds: 7 cm; height of letters: 7 cm.

1.1 Unpacking the clock

Carefully unpack the clock and check the contents of the package. This should include:
• Style clock
• 3 screws (Ø 4 mm) + wall plugs (Ø 6 mm) for Style 5 and 7models or 4 screws (Ø4mm) +
plugs (Ø 6 mm) for the Style 10 models.
• Anti-static cleaning kit
• IMPORTANT: product identification label
An identification label is affixed to the back of the clock. Use the URL link shown to download these
instructions.
6
EN