Maintenance Menu - Style 10D-10Sd - Bodet 5 Installation And Operation Manual

7.3 Maintenance menu – Style 10D-10SD
+
S
+ Hold down for 3 seconds
Open configuration menu
+
S
+ Hold down for 7 seconds
Software version
S
+
S
+
S
+
S
+
S
+
S
Display test (tests for correct functionning of all LEDs)
S
End of menu
Select synchronisation mode: NTP or independent NTP (ntPI)
+
« nor » mode:
- If the clock is not configured the message « no Id » is displayed.
- If the clock is configured, the Wi-Fi reception level is displayed:
from 1 to 3:
(horizontal bars)
S
« Init » mode:
Out of the factory the clock behaves as an Access Point.
Once the clock is configured, the clock access pont is deactivated.
It can be activated again by selecting « Init ».
To exit the « Init » mode and deactivate the Access Point select « nor ».
In the « Init » mode pressing « S » exit the technician menu and display the time.
+ + +
...
Resetting the clock (enabled when 'rstY' is selected)
Restore to factory settings (enabled when 'dF Y' is selected)
if the Wi-Fi signal is absent
or
S
Exit to T°offset adjustment or Clock restart
+ +
...
EN
Set the T°
offset
19