Operation; Storage - Kärcher VC 1 Series Manual

3. Connect the suction tube to the floor
nozzle.
Illustration F
4. Press the length regulator slide, and ad-
just the length of the telescopic suction
pipe to the desired length.
Illustration G
5. Connect the power cable to the power
supply.
Illustration H

Operation

Note
The appliance will be shut down automati-
cally if it is in danger of overheating. Switch
off the appliance and unplug the power ca-
ble. Ensure that the floor nozzle, the tele-
scopic suction pipe and the suction hose
are not clogged, and check whether the fil-
ter must be changed. After the elimination
of the block, cool the appliance down for at
least 1 hour.
1. Place the vacuum cleaner on the sur-
face to be cleaned.
2. Press the ON/OFF button to start vacu-
uming up the dust / dirt.
Illustration I
3. Press the ON/OFF button to switch off
the appliance after cleaning.
Adjusting the suction power
You can adjust the suction power while vac-
uuming in the following 2 ways:
 Slide the false air slide to adjust the suc-
tion power.
Illustration J
– False air slide open, reduced suction
strength.
– False air slide closed, normal suction
strength.
 Slide the suction power regulator to ad-
just the suction strength.
Illustration K
– Low suction strength - for laced cur-
tains, textiles, upholstered furniture
and cushions
– Medium suction strength - for slightly
dirty carpets, carpeted floors and pre-
cious carpets
20
– Highest suction strength - for hard
floors, very dirty carpets and carpeted
floors
Using accessories
 Attach the floor nozzle.
For cleaning carpets, floor, etc.
– Carpets and carpeted floors
Select the following switch setting:
Illustration L
– Hard surfaces
Select the following switch setting:
Illustration M
 Attach the parquet floor nozzle.
For cleaning upholstered furniture, wall
surface, curtain, gap of furniture, etc.
 Attach the crevice nozzle.
Illustration N
For cleaning delicate objects with care,
1
e.g. bookcase, handicrafts, etc.
For cleaning joints, choke points of the
2
door and windows, tiny slits, etc.
1. Switch off the appliance using the ON/
OFF button.
2. Unplug the power cable from the power
outlet.
3. Press the take-up cable button to rewind
the power cable automatically.
Illustration O
Note
 Store the appliance in a dry room.
 Consider the weight of the appliance
when storing it.
Suspend the floor nozzle into the mounting
bracket, and push the floor nozzle into the
latched position.
There are 2 mounting brackets:
 One mounting bracket is located on the
rear of the appliance.
Illustration P
 Another mounting bracket is located on
the bottom of the appliance.
Illustration Q
English
Shutdown

Storage