Local Recording; Storage - Speco O2BFR User Manual

4.1.3 Local Recording

Go to SystemLocal Recording to set up the storage path of captured pictures and recorded videos on the local PC. There is also an
option to enable or disable the bitrate display in the recorded files.
Additionally, face snapshots storage can be enabled or disabled here.

4.1.4 Storage

Go to SystemStorage to go to the interface as shown below.
 SD Card Management
When the card is used for the first time, click the "Format" button to format the SD card. All data on the card will be cleared by
clicking this button.
Click the "Eject" button to stop writing data to the SD card. Then the SD card can be ejected safely.
Snapshot Quota: Set the capacity proportion of captured pictures on the SD card.
Video Quota: Set the capacity proportion of record files on the SD card.
 Schedule Recording Settings
1. Go to StorageRecord to go to the interface as shown below.
2. Set record stream, pre-record time and cycle writing.
Pre Record Time: Set the time to record before the actual recording begins.
7