Camera Configuration; System Configuration; System Information; Date And Time - Speco O2BFR User Manual

4 Camera Configuration

Press the "Setup" button to go to the configuration interface.
Note: Wherever applicable, click the "Save" button to save the settings.

4.1 System Configuration

4.1.1 System Information

In the "System Information" interface, the system information of the device is listed.

4.1.2 Date and Time

To set the time and date, go to SystemDate and Time. Please refer to the following interface.
Select the applicable time zone and enable / disable DST as needed.
Click the "Date and Time" tab to set the time and date.
6