Video / Audio Configuration - Speco O2BFR User Manual

Defog: Activating this function and setting an appropriate value as needed in foggy, dusty, smoggy or rainy environment to get clear
images.
Backlight Compensation (BLC):
Off: disables the backlight compensation function. It is the default mode.

HLC: lowers the brightness of the entire image by suppressing the brightness of the image's bright area and reducing the size of

the halo area.
BLC: If enabled, the auto exposure will activate according to the scene so that the object of the image in the darkest area will be

seen clearly.
Antiflicker:
Off: disables the anti-flicker function. This is used mostly in outdoor installations.

50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.

White Balance: Adjust the color temperature according to the environment automatically.
Frequency: 50Hz and 60Hz can be optional.
Exposure Mode: Choose "Auto" or "Manual". If manual is chosen, the digital shutter speed can be adjusted.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways. 0, 90, 180 and 270 are available. The
default value is 0. The video resolution should be 1080P or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Schedule Settings of Image Parameters:
Click the "Schedule" tab as shown below.
Set full time schedule for common, day or night mode and specified time schedule for day and night. Choose "Timing" in the
drop-down box of schedule as shown below.
Drag " " icons to set the time of day and night. Blue means day time and blank means night time. If the current mode of camera
parameters is set to "Timing", the image configuration mode will automatically switch between day and night according to the
schedule.

4.2.2 Video / Audio Configuration

Go to ImageVideo / Audio interface as shown below. In this interface, set the resolution, frame rate, bitrate type, video quality
and so on subject to the actual network condition.
10