People Counting - Speco O2BFR User Manual

※ Configuration requirements of camera and surrounding area
1. The detection area should have stable and adequate light.
2. In order to detect all moving people in the detection area, the height range of the camera installation should be from 1 meter to
3 meters.
3. To make sure that the camera can capture all indoor objects, the camera lens should be pointed at the detected direction and
the camera had better be installed in the corner of the room.
4. The range of the captured people image should occupy from 1/5 to 1/2 of the whole picture.
5. The false alarm will be triggered if the indoor scene has cluttered and frequently changing lights.
6. This function is inapplicable to outdoors.

4.4.7 People Counting

This function is to calculate the number of the people entering or exiting from the detected area through detecting, tracking and
counting the head shapes of the people. The setup steps are as follows.
1. Go to AnalyticsPeople Counting. Please refer to the following picture.
2. Enable the people counting detection.
3. Set "Detection Sensitivity", "Entrancing Threshold", "Departing Threshold", "Staying Threshold", "Counting Period", "Alarm
Holding Time" and so on.
Counting Period: All, daily, weekly and monthly are optional.
Counting Reset: The current number of people counting will be cleared and the current counting period will restart by clicking
"Reset" button.
If the number of people exceeds the pre-defined threshold value (the default value is 500; the maximum value is 655350), alarms
will be triggered.
When someone passes the detected area, it will take 1 ~5 seconds to complete the people counting according to different scenes.
Set alarm trigger options. The setup steps are the same as motion detection. Please refer to
25
motion detection chapter for details.