IP Camera User Manual
4 Camera Configuration
Press the "Setup" button to go to the configuration interface.
Note: Wherever applicable, press the "Save" button to save
4.1 System Configuration
4.1.1 System Information
In the "System Information" interface, the system information of the
4.1.2 Date and Time
To set the time and date, go to System Date and Time. Please refer to the following interface.
Select the applicable time zone and enable/disable DST as needed
Click the "Date and Time" tab to set the time and date.
4.1.3 Local Recording
Go to System Local Recording to set up the storage path of captured
Local Recording to set up the storage path of captured images and recorded video on the local PC. There is also an option to
disable the bitrate display in the recorded files.
5
configuration interface.
o save the settings.
information of the device is listed.
Date and Time. Please refer to the following interface.
ble/disable DST as needed.
There is also an option to enable or