Table of Contents
Advertisement
Available languages
Available languages
Plumbing Installation
WARNING: Risk of electrical shock. A licensed electrician should make
all electrical connections.
CAUTION: Risk of property or product damage. Do not tighten the nut
too securely.
Connect the hose to the outlet connection with rubber washer. Use proper
¨
tools to tighten the nut.
Connect the hose to the pressure relief valve. Make sure to put mesh filter
¨
between hose and pressure relief valve
NOTE: When connect the pressure relief valve to water inlet, please make sure
the discharge nozzle is facing downward. Connect the
(not supplied) to the discharge nozzle in a continuously downward direction
and this tube must be left open to the floor drain exhaust or discharge pipe.
In abnormal condition where pressure gets higher than 6.0 bars, water will
drip from discharge tube.
CAUTION: Risk of property or product damage. Turn on the water
mains to drain out all plumbing dirt before connecting the water supply
to the water heater. The water supply to the water heater must be free
from mud and dirt. (Always KEEP the water supply to the water heater
free from mud and dirt at all time during usage).
At the same time fill up the heater tank. The heater tank must be filled
up with water before turning on the electricity supply to prevent any
dry burnt damage to the heating element.
1287791-X2-C
Pressure Relief Valve
Mesh Filter
Discharge Nozzle
PVC Tube
(Not Supplied)
8
8 mm discharge tube
Ø
8
Ø
Kohler Co.
Advertisement
Table of Contents
