Spout Installation - Kohler K-15886-K Installation Manual

Spout
Shank

1. Spout Installation

Apply a bead of plumbers putty or other sealant to the underside
of the spout or putty ring (if supplied) according to the putty
manufacturer's instructions.
Locate the center hole and insert the spout.
Slide the channel and nut on the spout shank. Adjust the position
of the spout and securely tighten the nut with a wrench. Do not
overtighten.
Remove any excess putty or sealant.
Kohler Co.
Apply
Plumbers
Putty
Channel
Nut
3 1011142-2-B