Table of Contents
Advertisement
Available languages
Available languages
Roughing-In
Dimensions are approximate.
Unit: mm
Installation
Select a suitable position in the bathroom.
¨
Remove the screw at the bottom of the unit.
¨
Remove the front cover from the bottom and then lift up the front cover.
¨
Rehearse heater unit installation for anchor mounting location determination.
¨
Mark 3 mounting holes of the heater base on the wall.
¨
Drill the anchor holes in depth of 34 mm with
¨
Insert the anchors and mount the heater firmly in position with the screws
¨
provided, then install the front cover.
Apply sealant tape to the inlet pipe. Then install the pressure relief valve
¨
with appropriate tool. Make sure that the arrow symbol on the valve body
is facing in front position.
Kohler Co.
187
Mounting Hole
175
A KOHLER COMPANY
Mounting Hole
120
7
Finished Wall
100
279
G1/2"
6 mm drill.
Ø
1287791-X2-C
Advertisement
Table of Contents
