Table of Contents
Advertisement
5. Installation Checkout
Ensure if water inlet valve is OPEN.
Wrap seat with plastic sheet to prevent splash water from toilet during test.
Toilet generates one short beep once it is plugged in. The nozzle stretches
out and draws back once. Backlight on the side panel lights up and the night
light flashes until the initialization process completes.
Snap hose and power cord into the clip.
The seat is designed not to function without an occupant. To activate the seat
controls for testing purposes, when facing the toilet, place your hand or a damp
wash cloth on the right side of the seat approximately 1/3 from the front of the
seat (sensor area).
Proceed to the "Keypad and Panel Diagram" Section to test the various seat
functions.
1361650-T01-B
8
Kohler Co.
Advertisement
Table of Contents
