Kohler NEW ELOSIS K-77218T-R Installation Instructions Manual
Kohler NEW ELOSIS K-77218T-R Installation Instructions Manual

Kohler NEW ELOSIS K-77218T-R Installation Instructions Manual

Mirrored cabinet

Advertisement

Quick Links

BEFORE YOU BEGIN

BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the latest
product information available at the time of publication.
Kohler China. reserves the right to make changes in
product characteristics, packaging, or availability at any
time without notice.
·
These instructions contain important care, cleaning, and
warranty information-
please leave instructions for the
consumer.
·
Before installation carefully inspect the new fixture for any
signs of damage.
·
This product complies with GB/T10357.4-2013,
GB/T10357.5-2013 and GB24977-2010.
WARNING: Risk of injury or product damage.
careful when opening the door to avoid pinching fingers.
WARNING:
Don't use acidic or alkalic cleaners or
alcohol to clean the surface. Use a dampened cloth to
clean.
CAUTION: Risk of electric shock.
may need to be relocated.
CAUTION: Risk of property damage.
(not provided) rated for the loaded weight of this
product. Refer to the anchor manufacturer's instructions.
Important Information:
either right or left door swing. Check the wall cavity for
obstructions.
Grounding Instructions
·
This product should be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
WARNING: Risk of electric shock.
the grounding plug can result in a risk of electric shock.
·
If repair or replacement of the cord is necessary, do not
connect the grounding wire to either flat blade terminal. The
wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
·
Check with a qualified electrician or service personnel if the
grounding instructions are not completely understood, or if
in doubt as to whether the product is properly grounded.
·
This product is factory equipped with a specific electric cord.
If the product must be reconnected for use on a different
type of electric circuit, the connection should be made by
qualified service personnel.
ZHONGSHAN KOHLER SHOWER CO., LTD.
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA
1304452-T01-B
Be
Electrical wiring
Use anchors
This cabinet is designed for
Improper use of
NEW ELOSIS
·
·
·
·
·
GB/T10357.4-2013
GB24977-2010
·
·
·
·
NO13-1, XINYE ROAD, ZHONGSHAN TORCH
13-1
©
Copyright Kohler China Investment Co., Ltd. 2016
-1-
©
Installation INSTRUCTIONS
MIRRORED CABINET
K-77218T/K-77218T-R
GB/T10357.5-2013
POST CODE: 528437
528437
-
2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEW ELOSIS K-77218T-R and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler NEW ELOSIS K-77218T-R

  • Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
  • Page 2 6PCS ROUGHING-IN Reference Value UNIT : mm K-77218T-R K-77218T 123.8 123.8 Kohler reserves the right to change marked dimensions without prior notice. ROUGHING-IN ELECTRICAL PARTS LIST ELECTRICAL PARTS LIST Type Description Item Electrical Function Fixate Place Input: 12V, Pmax=15W Input: 12V, Pmax=15W...
  • Page 3 CABINET INSTALLATION CABINET INSTALLATION Drill holes Drill holes 4- 6mm 4- 6mm 4- 6mm 4- 6mm Screw ST3.5X35 Wall Anchors ST3.5X35 40mm from top part of the countertop (such as faucet) ) 40mm INSTALLATION Install mounting bar Take out the mounting bar and put level. Drill holes according to the hole spaces. STEP 1304452-T01-B...
  • Page 4 Fix the clips and the cabinet 1. Put the cabinet on the mounting bar. 2. Insert the clips into the two sides on cabinet top and mark with pencil. Release the clips and drill holes at marked positions. 3. Fix the two clips and move to top. Put the cabinet onto the mounting bar and tighten the clips with screws. 4.
  • Page 5 Adjust the door (only necessary if the door does not completely match the cabinet when it is closed). Depth Adjustment Side Adjustment STEP Install accessories and side mirror as shown. 1. Fix side mirror bracket. 2. Align the side mirror with the top and bottom of the cabinet. Clean the back of the mirror. 3.
  • Page 6 Install glass shelf 1. Insert the snap-in pins into the side holes. 2. Insert the glass shelf into the snap-in pins. as shown in the illustration. STEP Power line connection Wire Input(three-core cable) 220V/50Hz Fixture Outlet Wiring Color Brown Yellow&Green Ground Neutral Blue...
  • Page 7 Line outlet of cabinet. Line outlet for Cabinet K-77218T-R K-77218T STEP 1304452-T01-B...

This manual is also suitable for:

New elosis k-77218t

Table of Contents