Installing A Fixed-Disk Drive In Position C; Installing A Fixed-Disk Drive In Position D - IBM RT User's Setup Manual

Drives Now
Installed in
System *
C E
D
R40 xxx R70
R70 xxx R40
2-12 Options Installation
New
Position
Drive of New
Drive
R70 D
R40 D
* If you are not sure which drives are in your system, see the
appropriate system unit diagram in Appendix A to locate your
drives. Use the illustration on page 2-10 to determine which drives
you have, and then return to this chart.
Installation Procedure to Use
R70 1. "Removing a Fixed-Disk
Drive in Position E"
on page 2-49. .
2. "Removing a Fixed-Disk
Drive in Position C"
on page 2-45
3. "Installing a Fixed-Disk
Drive in Position C"
on page 2-13
4. "Installing a Fixed-Disk
Drive in Position D"
on page 2-23
5. "Installing a Fixed-Disk
Drive in Position E"
on page 2-35
R40 Same as above.