IBM RT User's Setup Manual page 376

Press
12. Enter.
13. Does the FUNCTION SELECTION menu appear on the screen?
FUNCTION SELECTION
IP ITEM
1 Diagnostic Routines
This selection allows you to test your machine's hardware and
determine if you have a hardware problem. Any problem will be indicated
by a SRN (Service Request Number). The SRN will allow your service
representative to quickly determine what parts are required to repair
Go to the next step.
Yes.
Go to Step 37.
No.
14. Have any optional adapters been installed?
Go to the next step.
Yes.
Go to Step 20.
No.
15. Type 2 to select UTILITIES. Use the 2 on the typewriter key
area, not the numeric keypad. Press
SELECTION menu should appear on the screen.
16. Type 1 to select the SHOW INSTALLED OPTIONS utility.
Press processing may take several minutes.
Enter;
CONTINUE TO THE NEXT PAGE
Section 9. Checking Out the Option Installation
The UTILITY
Enter.
9-9