IBM RT User's Setup Manual page 380

26. Does the following information appear on the screen?
DIAGNOSTIC TEST LIST
The following options will be tested by the diagnostics routines.
Go to the next step.
Yes.
No. Go to Step 41.
27. Check if all installed options are listed on the screen.
Is the list correct?
Go to the next step.
Yes.
No. Go to Step 37.
28. Type 1 to indicate that the list of options is correct. Press
processing may take several minutes.
Enter;
29. When DIAGNOSTIC SELECTION appears on the screen, type 1
to select SYSTEM CHECKOUT, and press
30. When TEST METHOD SELECTION appears, type 1 to select
RUN TEST ONE TIME, and then press
take several minutes.
31. When processing finished, did TESTING COMPLETE appear on
the screen?
Go to step 46.
Yes.
No. Go to Step 37.
CONTINUE TO THE NEXT PAGE
Section 9. Checking Out the Option Installation 9-13
Enter.
Processing will
Enter.