IBM RT User's Setup Manual page 210

I n s t a l l i n g a F i x e d - D i s k D r i v e in P o s i t i o n E
Warning: Handle the fixed-disk drive carefully. Dropping,
shaking, or rough handling can damage both the drive and
any stored data and can cancel the warranty.
Refer to the system unit diagram in Appendix A to locate drive
position E.
Refer to "Handling Static-Sensitive Drives" on page 2-4 before
beginning this section.
Warning: Follow
a l l
Covers From the System U nits" on page 1-4 before you install
the fixed-disk drive in drive position E.
Use the following steps to install the fixed-disk drive in position E:
1. Remove the cooling fan assembly. See "Cooling Fan Removal"
on page 2-5.
2. Check the drive selection jumper or setup switches for the
correct setting.
CONTINUE
Section 2. Removing and Installing Drives in IBM 6150
instructions under "Removing the
2-35