Table of Contents
Advertisement
The illu stra tio n above shows the norm al Switch Bank 1
configuration. Use the following table to set Switch Bank 1 if your
configuration req u irem en ts differ.
Note:
If you are using the IBM M onochrome Display and Printer
A dapter in c o n ju n ctio n with the Megapel adapter, the printer port
on the Megapel a d ap te r must be disabled or a conflict will exist on
In terru p t Level 7. Refer to "A dapter C onflicts" on page 1-19 and to
the In terru p t and U sage Table on page 1-21 and 1-22.
If you have a Color G raphics A dapter (CGA) or an adapter th a t
emulates CGA (EGA, for instance) Switch 3 of Switch Bank 1 must
be set to OFF.
S w i t c h F u n c t i o n
R e se rv e d ; m u s t be O ff
i
2
P r in te r P o r t
3
C o lo r G ra p h ic s
E m u la tio n
R e serv ed ; m u s t be O n
4
The Megapel A dapter requires two adjacent, long
I n s t a l l i n g :
adapter slots. Slots 4 and 5 in the IBM 6150 and slots 2 and 3, 3
and 4, or 4 and 5 in the IBM 6151 can be used.
See the system u n it d ia g ra m to locate the adapter slots.
O f f
On
D isab le
E n a b le
E n a b le
D isab le
Section 7. Display A dapter Options
7-19
Advertisement
Chapters
Table of Contents
