Installing Communication And Network Options - IBM RT User's Setup Manual

Installing Communication and Network Options

CAUTION
Before doing any procedure, turn off power on the
system unit and all c onnecte d devices, and unplug system
unit and device power cables from electrical outlets.
Refer to "Safety Notice T r a n sla t io n s" on page iii.
If you have not removed the covers, see "Removing the Covers
From the System Units" on page 1-4.
Refer to "General Instructions" on page 3^4 when necessary for
information on installing adapters.
After all options have been installed, it is important to complete
the checkout procedure in Section 9, "Checking Out the Option
Installation."
Section 6. Communication and Network Adapter Options 6-5