What You Need; Removing The Damaged Print Tip - 3D Systems CubeX Print Tip Replacement

Your CubeX 3D printer
Print tip replacement
So you are the owner of a CubeX and you have to replace a print tip? We have gathered information from
what you need to how to do the print tip change.

What you need:

Print tip assembly
2.5mm hex driver
Pliers
Before beginning this process please remove all filament from the print jets and check that your
print pad is level. For instructions on how to do this please refer to theCubeX user guide.

REMOVING THE DAMAGED PRINT TIP

1
Turn off the CubeX and Unplug it from the mains power.
2