Setup And Installation Guide; Unpacking - Panduit PES197 Manual

Portable embossing system
Hide thumbs Also See for PES197:
Table of Contents

Advertisement

SETUP and INSTALLATION GUIDE

UNPACKING

The machine is delivered in a wooden packing case. This is due to its dimensions and weight and avoids the
risk of damage to the machine.
Uncrating the Unit.
a. Remove the crate cover by removing the 8 phillips head screws that secure the cover to the pallet.
b. Cut free the environmental shield covering from the unit, being careful not to cut through to the
machine.
c. The unit is secured to the pallet with two bolts located underneath the base. Using a wrench,
remove the two machine anchoring pins located in the lower part of the pallet.
d. Lift the machine and place on a suitable surface.
e. Save the crate and bolts for possible future use.
Retain
Crate &
Bolts
PES197 & PES197/E: PA25609A01_01
PES197 and PES197/E: ENGLISH
WARNING! THE MACHINE & CRATE WEIGHS
The Dimensions are: 33" (830 mm) X 29" (730 mm) X 24" (600 mm).
All displacements should be done by a forklift or therefore always by
two persons because the gross weight is approx.
a.
c.
Page: 1 of 17
145
lbs. (66 Kg).
145
lbs. (66 Kg).
b.
7-2009

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pes197/e

Table of Contents