Error Messages And Problem Solving; Error Messages - Panduit PES197 Manual

ERROR MESSAGES AND PROBLEM SOLVING

In case of breakdown or operator error, the machine will show what caused the machine cycle interruption on
the display and on the monitor.
The error signal is shown by an error code, followed by the corresponding message (refer to Error List). Please
consult the "Problem Solving" table for more information in order to resolve the problem.

ERROR MESSAGES

ERROR
E-00
E-01
E-02
E-03
E-04
E-05
E-06
E-10
E-27
E-28
E-29
E-30
E-38
E-39
E-48
E-50
E-53
E-55
E-61
E-62
E-63
E-64
E-65
E-66
E-68
E-70
E-71
E-72
PES197 & PES197/E: PA25609A01_01
PES197 and PES197/E: ENGLISH
PWR-ON STAND BY STATUS - PRESS START
OUT OF CARDS - PRESS START/FEED
CARD MISFEED - PRESS START/FEED
PUNCH MOTOR ERROR - CALL SEVICE
EMB. WHL ERR-CHECK CARD/PRESS START
X MOT.ERR- CHECK CARD/PRESS START
Y MOT.ERR - CHECK CARD/PRESS START
PAUSE EMBOSSING - PRESS START
PASSWORD DENIED - START TO CONTINUE
LOST SEMIPERMANENT DATA-PRESS START
DRUM DATA LOST - PRESS START
NO DRUM CONFIGURATION - PRESS START
CONFIG. LOST-PRESS START AND CHECK
NO CONFIG. - PRESS START AND CHECK
PRINTER NOT CONNECTED - START/FEED
DRUM WHEEL ERROR – PRESS START
PUNCH ADJUSTMENT LOST – PRESS START
WRONG TRANSLATION TABLE – PR. START
BCC ERROR - PRESS START OR FEED
PARITY ERROR - PRESS START OR FEED
NO FIELDS IN MASK - PRESS START/FEED
CODE ERROR - PRESS START OR FEED
FIELDS OVERFLOW - PRESS START/FEED
BAD FORMAT - PRESS START OR FEED
LONG FIELD - PRESS START OR FEED
HEADER FORMAT ERROR - PRESS START
MOD- CHECK ERROR - PRESS START
REDUNDANCY ERROR – PRESS START
Page: 13 of 17
MESSAGE
7-2009