TVS Apache RTR 200 4V ABS Race Edition 2.0 Owner's Manual page 84

Tyre tread condition
Operating the vehicle with excessively worn tyres
will decrease riding stability and can lead to loss of
control. It is recommended to replace the tyre when
the tyre wears off to the tyre wear indicator level
(indicated by TWI on the tyre).
Warning
The tyre inflation pressure in cold condition and the
tyre thread condition are extremely important for the
performance and safety of the rider. Check the tyres
frequently for inflation pressure as well as the wear
pattern on it. Use of a tyre other than the standard will
cause instability.
76
Tyre rotation direction
While reassembling the tyre, after removing from
wheel rim, ensure that the arrow mark (A) provided
on the tyre, faces the direction of wheel rotation.
Tyre puncture
TVS Apache RTR 200 4V ABS (Race Edition 2.0) is
fitted with a tubeless tyre on both front and rear
wheel. lncase of any puncture / tyre damage it is
advised to visit nearest tyre manufacturer Dealer
or the tyre repair shops who know the repairing
A
methods of tubeless tyre. It is not necessary to
remove the tyre from wheel rim always to attend
the puncture. Eventhough, if there is a need of tyre
removal, it is strongly recommended to use a tyre
removal / fitment machine. If at all, tyre levers need
to be used, the levers should be free from sharp
edges and care should be taken not to damage the
rim and tyre.
Use of a tyre other than the standard may cause
instability and improper function of ABS.
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damage to the toner ring.
Damaged toner ring affects the ABS function.
Warning