TVS Apache RTR 200 4V ABS Race Edition 2.0 Owner's Manual page 75

SELF - MAINTENANCE PROCEDURES
BATTERY
1. To ensure better performance and long life of
battery, you are requested to follow the steps
given bellow:
2. Remove the cover frame R (refer page No. 54).
3. Check the battery voltage. If the voltage measured
is less than 12.4V, charge the battery using TVS
Motor Company Limited recommended battery
charger only at TVS Motor Company Authorised
Main Dealer / Authorised Dealer.
4. Apply petroleum gelly to the terminals to avoid
corrosion.
5. Do not add additional electrical accessories.
Caution
Never check the battery charge by shorting the terminals.
Always connect the positive terminal first (red wire) and
then negative (black wire) to avoid sparking.
The inversion of the battery wires can damage the
battery and the recharging system.
If the motorcycle is to remain unused for a long time (a
month or longer), it is advisable to disconnect the battery
cables or have the battery removed by skilled personnel.
67