TVS Apache RTR 200 4V ABS Race Edition 2.0 Owner's Manual page 42

If the pass key entered wrongly then the instrument
cluster displays the following message.
On connecting with the smart phone successfully,
the instrument cluster displays the user name which
is fetched from the smart phone as shown.
Note
Auto-pairing happens only if the application is locked
in the RAM in multitaksing screen of the phone with
manufacturer's customised OS (Ex. : MI, Vivo etc.).
In case of Android phones with Android OS version
above 8.0 for App to work seamlessly, any battery
optimisation setting to be removed in the TVS Connect
app and GPS shall be allowed to run in backround in high
accuracy mode.
Even if your phone's Bluetooth is already paired to
other gadgets like smart watch, health band or helmet,
the auto-pairing works with your TVS Apache RTR 200
4V ABS (Race Edition 2.0) motorcycle's connected
instrument cluster.
34
Note
In Android smart phones, if the Bluetooth is 'ON', and if
the app is already paired with the cluster, the app opens
automatically and connects with the cluster once the
user takes his phone to near by the vehicle and turns
'ON' the ignition (if the auto launch setting of your smart
phone is turned 'ON'). This feature can be disabled if
required.
Similarly, in Android and IOS smart phones, if the
Bluetooth is 'ON', and if the app is already paired with
the cluster, when the user opens the app with the
ignition turned 'ON', the app connects automatically with
the cluster once the user takes his phone to near by the
vehicle. (if the auto connect setting of your smart phone
is turned 'ON'). This feature can be disabled if required.
Auto connect will only work with the last paired mobile
phone.
If the application unfortunately stops due to unfrossen
circumstances. Close and reopen the application and do
the manual pairing for the first time, then auto-pairing
will happen subsequently.
For first time pairing, logout from the app, login again
with your login credential and press 'Connect' icon.