TVS Apache RTR 200 4V ABS Race Edition 2.0 Owner's Manual page 46

Crash alert
Based the smart phone's accelerometer data, crash
alert will be detected by smart phone and the same
will be transferred to connected instrument cluster.
Any button connected to the instrument cluster such
as Mode & Set button and 'Info switch' will cancel
crash alert and no other alerts will be active at this
time.
Note
Presently the crash alert is detected from the smart
phone. Hence the accuracy of the same depends of the
placement of the smart phone on the vehicle and the
status of connection of the phone to the vehicle. For
best accuracy, it is recommended that the user mounts
the phone to a rigid part of the bike.
38
If alert is not cancelled within 180 seconds, a
message will be sent to Emergency Contacts with
location details.
Clock auto sync:
Whenever the app is connected to the connected
instrument cluster the clock of instrument cluster
gets synchronised with the clock of the phone.
G-force measurement
G-force measurement provides an approximate
G-force measure wherein the vehicle is operated.
The G-force is measured during both acceleration
and deceleration of the vehicle.
Note
The G-force is measured based on the vehicle speed and
not with an on-board measurement unit. So there might
be a variation between the actual and the measured
values. The G-force value displayed is only an estimate
of the actual value.