Switching Off - EDAN SD5 User Manual

SD5/SD6 Ultrasonic TableTop Doppler User Manual
To avoid unwanted noise, do not take out or place the probe when the main unit is on.
Remember to take out the probe before switching on the main unit, and place the probe
after switching off the main unit.
To switch on the main unit,
Pick up the probe and then press the ON/OFF key
All the real-time examining menu elements light up in a few seconds. A start-up sound is heard.
The Doppler performs a self test by displaying the FHR numerics in a fast speed.
To switch on the wireless probe,
Press the ON/OFF key
NOTE:
1 The ON/OFF keys of the wireless probe and the main unit need to be pressed
separately.
2 The wired probe is ready to use when the main unit is switched on.

3.6 Switching Off

When the examination is finished, switch off the main unit, wipe the remaining gel off the probe
with a clean soft cloth and then place the probe back into the holder.
To switch off the main unit, perform any one of these operations:
1) Press the ON/OFF key
2) Put the probe into the probe holder.
3) Auto shut off. If the main unit does not receive signal for a period of time, it will be
switched off automatically. The auto-shut-off time is preset in the setup menu. Refer to
section 3.9.3 Setting Auto-Shut-Off Time.
To switch off the wireless probe,
Press the ON/OFF key
NOTE:
It is recommended to switch off the probe first, and then put the probe into the probe
holder.
CAUTION
on the wireless probe. The probe indicator lights up in green.
on the main unit.
on the wireless probe.
- 16 -
on the main unit.
Basic Operation