Table of Contents
Advertisement
SD5/SD6 Ultrasonic TableTop Doppler User Manual
3.9.6 Setting Date Format
You can choose to switch the date on or off. When it is on, the date format has three options:
DD/MM/YYYY, MM/DD/YYYY and YYYY/MM/DD.
To switch the date on and off or change date format,
1 Press the Setup key to open setup menu.
2 Press the Up/Down key to move the cursor to Date Format, press the Setup key.
3 Press the Up/Down key to toggle between ON and OFF. If you choose ON, the cursor
moves to the date format. Select a format.
4 Press the Setup key.
NOTE:
If no operation is performed in 30 seconds, the device will also exit from the setup menu.
The setting changes will not be effective.
3.10 Replacing Fuses
Switch off the main unit and unplug it before replacing the fuses.
Two fuses are located on the rear panel of the device, their specifications are:
Size: Ф5mm*20mm; Model: T400mAH250V.
When any one of the fuses is blown, perform the following steps to replace it:
1. Using a flat-head screw driver, push the fuse in for about one millimeter and then rotate it
anticlockwise.
2. Remove the old fuse and replace it with a new fuse that is supplied by the manufacturer or of
the same specifications.
3. Push the new fuse into the socket for about one millimeter and then rotate it clockwise back
into position.
WARNING
- 20 -
Basic Operation
Advertisement
Table of Contents
