Appendix 2 Emc Information - Guidance And Manufacture's Declaration; A2.1 Electromagnetic Emissions- For All Equipment And Systems - EDAN SD5 User Manual

SD5/SD6 Ultrasonic TableTop Doppler User Manual
Appendix 2 EMC Information – Guidance and
Manufacture's Declaration
A2.1 Electromagnetic Emissions- For all EQUIPMENT and
SYSTEMS
Guidance and manufacture's declaration- electromagnetic emission
The SD5/SD6 is intended for use in the electromagnetic environment specified below. The customer
or the user of the SD5/SD6 should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage
fluctuations/flicker
emissions
IEC61000-3-3
Compliance
The SD5/SD6 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
Group 1
not likely to cause any interference in nearby electronic
equipment.
Class A
The SD5/SD6 is suitable for use in all establishments,
Class A
other than domestic and those directly connected to the
public low-voltage power supply network that supplies
building used for domestic purposes.
Complies
Electromagnetic environment-guidance
- 33 -
EMC Information