Use And Operation - Duramaxx 10000503 Manual

Batteries
1. Press the "key" on the battery cover in the di-
rection of the arrow, pull out the battery cover.
2. Insert the 6 AA batteries into the compart-
ment as indicated by the polarity symbols
marked inside the compartment.
3. The battery cover align the battery depot
(the UP-side is upon), then push horizon-
tally into the cover. 6 alkaline batteries are
available for about 40 hours. If you don't
use detector for a week or more, please re-
move the batteries from the battery box.
To get you master how to operate the metal detector quickly,we suggest that you should read
the quick start carefully,and practice indoor. When you are familiar with the detector,you
can hunt for the treasures just about anywhere.
1. Prepare with a sort of metal samples such as an iron
nail and coins.
2. In order to avoid the metals influence the detector, be
sure to lay the metal detector properly. Place the detec-
tor on a wooden or plastic table. Let the search coil ex-
ceeds the table edge about more than 5 inches (15cm),
keep the flat part points outward. Please take off the
watch,ring or other metal objects on your hand or arm.
Keep the detector away from the wall, floor and other
metal objects. Be sure to keep the detector away from
the light, TV, computer and mobile telephone, which
can cause electro-magnetic interference.
3. Turn on the power supply,and set the volume knob to the mid position.
4. Set the MODE switch to ALL METAL,and SENS to "10".The DISC/TONE knbo is useless
at this time

Use and Operation

17