Assembly - Duramaxx 10000503 Manual

1. Turn clockwise to relax the end of bend-shape tube sleeve, and insert the tube which
connect searchcoil in the sleeve. Adjusting the length, so you can stand comfortably
and straighten your arms. Lock the sleeve anti-clockwise when the searchcoil is from
the ground about 1/2 inches (see picture).
2. Let the plastic pillar with two nuts on the bottom of detector control box alignment with
two hole of the bend shape tube, and lock with bolts.
3. Coil the cable of the search coil onto the tube pole, keep the elastic moderate. So that the
cable won't sway, and then insert the cable plug into the lower right socket of the control box.
4. The corbel has two positions. The initial corbel locates longer position. If your arms are
shorter, such as women, children,you can adjust the corbel position. Please release a
screw the left and right under of the corbel when regulation. So that the left and right
corbels are loosen. Adjust the corbel forward to another position. And then tightened the
two screws
16

Assembly