Table of Contents
Advertisement
B.3 24 V
DC
This is a DC to DC switching mode power supply with a 24 V
Input voltage:+19 ~ +32 V
Input current:16 A max. @ +24 V
Inrush current:10 A max. @ +24 V
Output load range:
Output
voltage
+3.3V
+5V
+12V
-5V
-12V
+5V sb
Table B.3: 24V
At the factory, the +5 V output was set between 5.00 and 5.10 V, while
other outputs were simultaneously set at 60% of their respective rated
loads.
The -5 V and -12 V outputs can be used at their respective rated loads.
The +5 V output should carry a load of at least 4 A.
Output power:
Total DC continuous power does not exceed 250 W. Each output should
be able to operate continuously under its maximum load.
Ripple and noise:
Peak to peak ripple and noise for each output is less than 1% of
each output's respective voltage. Measurements were performed
with a 15 MHz bandwidth limited oscilloscope, and each output
was terminated with a 0.47 µF capacitor.
power supply
DC
Max Load
25A(Max. 150W)
30A(Max. 150W)
12A
.5A
1A
1A
power supply output load range
DC
(normal operation)
input
DC
input
DC
Total Max. Output
V
33
input.
DC
250W
Appendix B
Advertisement
Table of Contents
