Multiple Eventspots (Dmx Control) - SHOWTEC EventSpot 1600 Q4 Set Manual

EventSpot 1600 Q4 Set

Multiple EventSpots (DMX Control)

01) Leave at least 0,5 meter on all sides for air circulation
02) Use a 3-pin XLR cable to connect the EventSpots and other devices.
03) Link the units as shown in (Fig. 08). Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third and fourth units.
Multiple EventSpots DMX Setup
Ordercode: 44057
14
Fig. 08