Configure Recording Schedule - HIKVISION HiWatch Series User Manual

Step 7 Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
Step 8 Click OK.
Result: The added NetHDD will be displayed in the storage device list.

5.4.2 Configure Recording Schedule

Purpose
Video recorder will automatically start/stop recording according to the configured schedule.
Configure Continuous Recording
Step 1 Go to Configuration > Record > Parameter.
Step 2 Set the continuous main stream/sub-stream recording parameters for the camera. For
detailed steps, refer to 5.4.3 Configure Recording Parameter.
Step 3 Go to Configuration > Record > Schedule.
Step 4 Select recording type as Continuous. For detailed steps, refer to Edit Schedule.
Configure Event Recording
Purpose
You can configure the recording triggered by the motion detection, line crossing detection, and
intrusion detection.
Step 1 Go to Configuration > Event > Smart Event.
Digital Video Recorder User Manual
Figure 5-18 Add NetHDD
44