HIKVISION HiWatch Series User Manual page 45

Step 2 Configure the event detection and select the channels to trigger the recording when an
event occurs. For detailed steps, refer to 5.3.4 Smart Event.
Step 3 Go to Configuration > Record > Parameter.
Step 4 Set the continuous main stream/sub-stream recording parameters for the camera. For
detailed steps, refer to 5.4.3 Configure Recording Parameter.
Step 5 Go to Configuration > Record > Schedule.
Step 6 Select recording type as Event. For detailed steps, refer to Edit Schedule.
Edit Schedule
Step 1 Go to Configuration > Record > Schedule.
 Continuous: Continuous recording.
 Event: Recording triggered by all event triggered alarm.
Step 2 Select a camera in Camera No.
Step 3 Check Enable.
Step 4 Configure the recording schedule. Choose from:
 Edit Schedule
3) Click Edit.
4) Select a day to configure in Weekday.
5) To set an all-day recording schedule, check All Day and select schedule Type.
Digital Video Recorder User Manual
Figure 5-19 Recording Schedule
45